Actuators - Hella Gutmann mega macs X Bedienungsanleitung

9. | Working with the mega macs X
NOTICE
The selection of the following possibilities depends on the selected manufacturer and vehicle type:
- Functions
- Component group
- System
- Data
3. Select the requested component group.
4. Regard the warning notice if appears.
5. Select the requested system.
6. Observe the start info.
7. Follow the instructions on the screen and start reading.
ð Communication to vehicle is being established.
ð The device automatically adds the most important parameters to the list Selected parameters:.
ð Use
to call up information on the selected parameters in the parameter selection menu, e.g. component de-
scriptions.
ð Use to remove selected parameters.
ð Use Search for parameters to search for additional parameters.
8. Use Groups - (all parameters) to select requested parameter groups.
ð Diagnose a certain problem directly by selecting a parameter group, as only the parameters required for it are
stored.
9. Start the parameter reading procedure with >Activate<.
ð During the readout procedure, the recordings are automatically saved in the Car History under the previously en-
tered registration number.
10. Return to the selection of systems and component groups with >Complete<.

9.4.5. Actuators

Use this menu to activate components in electronic systems. You are hence able to check basic functions and cable con-
nections of those components.
172
Hella Gutmann
mega macs X