Hella Gutmann mega macs X Bedienungsanleitung Seite 125

Hella Gutmann
CAUTION!
Rolling of vehicle
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the OBD plug
Danger of destruction of automotive electronics
Switch off ignition before connecting the OBD plug to the vehicle.
4. Plug in the OBD plug in the vehicle's diagnostic connector.
5. Insert the USB cable into the USB port of the laptop/tablet.
ð Connection is going to be established. The laptop/tablet is connected to the vehicle.
ð The PassThru function is active.
6. Switch on the vehicle ignition.
7. Observe the manufacturer's specifications.
8. Select the HGS PassThru shortcut on the desktop.
9. Select the requested language.
10. Call up the requested manufacturer web site online with the laptop/tablet.
11. Follow the instructions on the manufacturer portal.
12. Select PassThru of Hella Gutmann.
mega macs X
Initial Start-Up of the HGS PassThru Software | 6.
125