Service Reset - Hella Gutmann mega macs X Bedienungsanleitung

Hella Gutmann
9.4.8.1. Performing Test Functions
NOTICE
First select a vehicle before doing any test functions.
For more information about the vehicle selection read the sections Vehicle selection [} 162] and CSM ve-
hicle selection [} 163].
CAUTION!
Rolling of vehicle
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the OBD plug
Danger of destruction of automotive electronics
Switch off ignition before connecting the OBD plug to the vehicle.
Proceed as follows to perform the test function:
1. Plug in the OBD plug in the vehicle's diagnostic connector.
2. Select Diagnostics > Test function in the App launcher.
3. Select the requested component group.
4. Select the requested system.
5. Follow the instructions on the screen and start the procedure with >Start<.
6. Regard the window with information and instructions.
7. Follow the instructions on the screen.

9.4.9. Service reset

Here you can reset service intervals provided that this function is supported by the vehicle. The diagnostic device performs
the resets either automatically or you find a description for the manual reset procedure.
mega macs X
Working with the mega macs X | 9.
177