Calling Up Vehicle Information - Hella Gutmann mega macs 77 Schnellstartanleitung

Working with the Device

Calling Up Vehicle Information

1. Select the desired vehicle under >Vehicle selection< in the main menu.
CAUTION
Pulling off of the DT VCI when actuating the clutch
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the DT VCI
Danger of destruction of automotive electronics
Switch off ignition before connecting the DT VCI to the vehicle.
2. Insert the DT VCI into the vehicle's diagnostic port.
Both LEDs of the DT VCI flash. The DT VCI is ready for operation.
3. Select >Diagnostics< in the main menu.
Now you can select the type of diagnostics.
7.3 Calling Up Vehicle Information
Here you have an overview of the vehicle information including the following:
• Car History
• Component Help
• Service data
NOTE
You require an online connection if you wish to access all available information.
Proceed as follows to call up vehicle information:
1. Select >Vehicle information< in the main menu.
2. Select the desired type of information using the symbols.
Certain types of information may not be available depending on the selected vehicle.
mega macs 77
EN
51