Hella Gutmann mega macs X Bedienungsanleitung Seite 173

Hella Gutmann
9.4.5.1. Activating the Actuator
NOTICE
First select a vehicle before you can activate an actuator.
For more information about the vehicle selection read the sections Vehicle selection [} 162] and CSM ve-
hicle selection [} 163].
DANGER
Rotating/moving parts (electric fan, brake calliper piston, etc.)
Danger of cutting or pinching fingers or device parts
Remove the following things from the danger zone before actuating actuators:
- Limbs
- Persons
- Device parts
- Cables
CAUTION!
Rolling of vehicle
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the OBD plug
Danger of destruction of automotive electronics
Switch off ignition before connecting the OBD plug to the vehicle.
Proceed as follows to activate the actuator:
1. Plug in the OBD plug in the vehicle's diagnostic connector.
2. Select Diagnostics > Actuators in the App launcher.
mega macs X
Working with the mega macs X | 9.
173