Deleting Trouble Codes In Vehicle System - Hella Gutmann mega macs X Bedienungsanleitung

Hella Gutmann
CAUTION!
Rolling of vehicle
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the OBD plug
Danger of destruction of automotive electronics
Switch off ignition before connecting the OBD plug to the vehicle.
Proceed as follows to read out the trouble codes:
1. Plug in the OBD plug in the vehicle's diagnostic connector.
2. Select Diagnostics > Trouble codes in the App launcher.
ð The device gives an overview of the global check.
3. Click to to open individual systems.
4. Click to to read out only the selected system.
ð The window Prepare vehicle appears.
5. Observe the info and instruction window.
6. Click >Next<.
ð Communication to vehicle is being established. All trouble codes are displayed which are saved in the ECU.
7. Select the requested trouble code.
ð The corresponding repair tips are indicated.
8. Use >Measurements< to switch directly to the Measurements function.

9.4.2.2. Deleting Trouble Codes in Vehicle System

Here you can delete the read-out trouble codes of a vehicle system.
Proceed as follows to delete the trouble codes of a vehicle system:
1. Perform steps 1 to 9 as described in section Reading out trouble codes [} 166].
mega macs X
Working with the mega macs X | 9.
167