Fuses/Relays - Hella Gutmann mega macs X Bedienungsanleitung

9. | Working with the mega macs X
Proceed as follows to retrieve wiring diagrams:
1. Select Information > Wiring diagrams in the App launcher.
2. Select the requested component group.
3. Select the requested system.
ð Several system types can be installed in one vehicle model range. The system type is mostly written on the ECU or
can be determined through parameter readout.
ð The wiring diagram appears.
4. Select the requested component by clicking it under Components.
ð The component is indicated by a colored frame and the appropriate designation.
9.5.7.2. Retrieving Interactive Wiring Diagrams
NOTICE
The OBD plug needs to be connected to the vehicle's diagnostic connection so that you can retrieve interac-
tive wiring diagrams.
Not every component supports this function (supported components are marked with a dot in the legend).
Proceed as follows to retrieve interactive wiring diagrams:
1. Perform steps 1 to 3 as described in section Calling Up Wiring Diagrams [} 183].
2. Click to to view parameters from the diagnostic request.

9.5.8. Fuses/relays

Here you can view the installation position of the main fuse box, the fuse box and the relay box as well as the individual
fuses.
9.5.8.1. Calling Up Fuse and Relay Box Images
Proceed as follows to call up fuse and relay box images:
1. Select Information > Fuses/relays in the App launcher.
2. Select the required fuse/relay box under Fuse box.
ð The device indicates the fuse box and or the relay box.
ð On the right there is an overview of the selected fuse and relay box.
ð The top left window indicates the installation position of the fuse or relay box in the vehicle marked with a red
.
ð The relays are marked with grey rectangles.
ð Fuses are marked with colored rectangles.
184
Hella Gutmann
mega macs X