Putting The Mega Macs X Into Operation; First Use With The Hella Gutmann Tablet - Hella Gutmann mega macs X Bedienungsanleitung

7. | Putting the mega macs X into Operation

7. Putting the mega macs X into Operation

7.1. First use with the Hella Gutmann Tablet

NOTICE
When starting the device for the first time and after every software update, you need to confirm the general
terms and conditions (GTC) of the Hella Gutmann Solutions GmbH. Otherwise, certain device functions will
be unavailable.
Proceed as follows to take the mega macs X into operation for the first time with the Hella Gutmann Tablet:
1. Switch on the mega macs X.
2. Switch on the Hella Gutmann Tablet.
3. Wait until the Wi-Fi indicator at the mega macs X is permanently green.
ð The HGS setup on the Hella Gutmann Tablet will start automatically and guides you through the initial setup.
NOTICE
The HGS setup changes the languages every 3 seconds.
4. Select the language.
5. Select the country.
6. Scan the QR code on the housing of the mega macs X.
126
Hella Gutmann
mega macs X