Basic Setting - Hella Gutmann mega macs X Bedienungsanleitung

9. | Working with the mega macs X
3. Select the requested component group.
4. Select the requested system.
5. Follow the instructions on the screen and start the procedure with >Start<.
6. Regard the window with information and instructions.
ð Communication to vehicle is being established.
ð By switching on or switching off single actuators you can do tests on the vehicle.

9.4.6. Basic setting

Here you can adjust or adapt components and ECUs according to manufacturer's specifications.
9.4.6.1. Preconditions for Basic Settings
Regard the following in order to perform basic settings:
• Vehicle system is working properly.
• No faults saved in trouble code memory of ECU.
• Vehicle-specific preparations have been done.
9.4.6.2. Performing Basic Settings
NOTICE
First select a vehicle before doing any basic settings.
For more information about the vehicle selection read the sections Vehicle selection [} 162] and CSM ve-
hicle selection [} 163].
WARNING
Wrong or incorrectly performed basic settings
Risk of injury or material damage to vehicles
Regard the following when performing basic settings:
1. Select the correct vehicle type.
2. Regard the window with information and instructions.
174
Hella Gutmann
mega macs X