Diagnostics - Hella Gutmann mega macs X Bedienungsanleitung

9. | Working with the mega macs X
CAUTION!
Rolling of vehicle
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the OBD plug
Danger of destruction of automotive electronics
Switch off ignition before connecting the OBD plug to the vehicle.
2. Plug in the OBD plug in the vehicle's diagnostic connector.
3. Regard the window with information and instructions.
4. Close the info and instructions window.
5. Select the requested diagnostic type (e.g. >Service reset<) in the App launcher.
ð The Login window appears.
6. Enter the CSM user data and select >Login<.
7. Confirm the user identification with >Confirm<.
ð The entire scope of diagnostics is available now.

9.4. Diagnostics

The manufacturer-specific vehicle communication enables the data exchange to the vehicle systems that shall be checked.
The prevailing in-depth diagnostics and variety of diagnostics depends on the functional scope of the ECU.
The following parameters are available under Diagnostics:
• >Trouble codes<
Here you can read out and delete trouble codes stored in the ECU memory. Information on the trouble code are avail-
able too.
• >OBD diagnostics<
Start the OBD2 diagnostics through emission-relevant components here. Here you select merely the vehicle manufac-
turer and the fuel type.
• >Parameters<
164
Hella Gutmann
mega macs X