Technical Data; Noise & Vibration; Care & Maintenance; Declaration Of Conformity - Pattfield Ergo Tools PE-20 AGB Bersetzung Der Originalbetriebsanleitung

Technical Data

ANGLE GRINDER
Nominal voltage
No-load speed
Max. size of wheel
Spindle size
Weight
Sound pressure level (L )
pA
Sound power level (L )
wA
Max. vibration emission (a )
h,AG
SUITABLE BATTERIES
Voltage
Capacity
SUITABLE CHARGER
Nominal voltage
Output voltage
Charging time
Operation temperature
Protection Class
Weight
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 60745 and can be used to compare tools.
It may be used for a preliminary assessment
of exposure.
142 EN
max. 20 V
8800/min
ø 115 mm
M14
1.47 kg
75.8 dB(A) / Uncertainty K = 3 dB(A)
86.8 dB(A) / Uncertainty K = 3 dB(A)
3.1 m/s / Uncertainty K = 1.5 m/s
2 2
PE-AK2, PE-AK4
20 V
PE-AK2 (6801240): 2.0 Ah Li-ion battery
PE-AK4 (6801241): 4.0 Ah Li-ion battery
PE1H
100-240 V ~ 50/60 Hz, 78 W
14.4-20 V , 3.0 A
60 min for PE-AK2
120 min for PE-AK4
10-40 °C
/ II
0.25 kg
Warning! The vibration emission
during actual use can differ from the
declared total value depending on the use
of the tool.
Care & Maintenance
Caution! Make sure the tool is
switched off and the battery re-
moved.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
- Motor brushes can only be replaced by a
qualified person.

Declaration of conformity

We declare, that the product
described in Technical Data:
Cordless Angle Grinder PE-20 AGB
manufactured for:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Directive 2006/42/EC
RoHS Directive 2011/65/EU
EMC Directive 2014/30/EU
and in accordance to the following applicable
harmonized standards:
EN 60745-1:2009+A11
EN 60745-2-3:2011+A2+A11+A12+A13
EN 55014-1:2006+A1+A2
EN 55014-1:2017
EN 55014-2:2015
Andreas Back
Head of Quality Management, environment
& CSR
Person authorised to compile the technical
file
Bornheim, 15.08.2018
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
EN 143