About These Instructions; Document Number; Validity; Target Group - Truma Mover smart A Gebrauchsanweisung

Mover smart A
1

About these instructions

These operating instructions form part of the product�
Always keep the operating instructions in the
vehicle�
Make the safety instructions accessible to other
users too�
1.1

Document number

The document number of these operating instructions
is printed on each inside page in the footer and on the
back�
The document number consists of
Article number (10 numbers)
•
Revision status (2 numbers)
•
Publication date (month/year)
•
1.2

Validity

These operating instructions apply exclusively to the
Mover smart A�
1.3

Target group

These operating instructions are aimed at users�
 Gender-specific language has not been used to im-
prove legibility� Corresponding terms apply to people
of all genders in the interests of equal treatment�
1.4

Symbols and displays

Symbol Meaning
Warning of hazards for people
Technician
Additional information to help with under-
standing or optimising work processes�
Symbol for an action step�
Something has to be done here�
*
Optional parts
Reference to an image
(Fig� 3-1)
E�g� Figure 3 – number 1
60040-00350 ∙ 00 ∙ 08/2022
1.5

Warnings

Warnings are used in these operating instructions to
warn of property damage and personal injury�
Always read and observe warnings�
Warning word Meaning
Hazards for people�
Risk
Failure to observe this information
will lead to fatal or severe injury�
Hazards for people�
WARNING
Failure to observe this information
will lead to fatal or severe injury�
Hazards for people�
CAUTION
Failure to observe this information
may lead to minor injury�
Information about preventing pro-
NOTICE
perty damage
The installer or vehicle owner must apply the yellow
sticker with the warning information, which is enclosed
with the appliance, in a location in the vehicle where it
is clearly visible to all users (e�g� the wardrobe door)�
Missing stickers can be requested from Truma�
1.6

Abbreviations and glossary

Word Meaning
Light-emitting diode
LED
ABE General operating permit
1.7

Supplied

Operating instructions on the functionality of the ma-
•
noeuvring system with associated safety instructions
ABE
•
Installed manoeuvring system including remote con-
•
trol for controlling the manoeuvring system
20 mm spacer plate for regularly checking the gap
•
between tyres and drive rollers
If available: battery cut-off switch for establishing /
•
disconnecting the power supply to the entyre system
Hexagonal socket spanner for manual emergency
•
disengaging of the drive units
1.8

Accessories

Power Set BC
About these instructions
EN 23