Mover® H SE R / H TE R
Table of contents
Symbols used ...................................................................... 13
Batteries .............................................................................. 14
Remote handset .................................................................. 14
Maintenance ..................................................................... 15
Checks ................................................................................. 16
Trouble-shooting .............................................................. 16
remote hand set .................................................................. 16
Technical data ................................................................... 16
Intended use ........................................................................ 18
Approval .............................................................................. 18
Symbols used
Symbol indicates potential dangers.
Note with information and tips.
Safety instructions
-
The H SE R / H TE R control systems may only be used for
the Mover® H SE R / H TE R.
-
Practice operating the Mover® in an open area before using
for the first time. This to fully familiarise yourself with
the handset / Mover® operation.
-
Always check tyres and drive rollers before using the equip-
ment; remove sharp-edged stones and the like if necessary.
-
No person must be present in the caravan during operation.
-
All persons (particularly children) must remain outside
the Mover® operating area.
-
When operating the Mover®, ensure that no hairs, fingers
or other body parts, clothing or any other objects carried on
the body can become trapped by moving or rotating parts
(e.g. drive rollers).
-
The distance between the radio remote hand set and the
centre of the caravan when manoeuvring must not
exceed 10 m!
-
In the event of malfunctions pull on the handbrake.
-
To prevent the caravan from tipping, direct the tow
hitch downhill when manoeuvering down a slope. This
ensures that the wheels, in particular those driven by
the Mover® H TE R, retain their road grip.
-
After manoeuvring, always apply the handbrake first,
engage the drive rollers from the tyres and block the
wheels (particularly on downwards-sloping surfaces). The
Mover® is not suitable for use as a parking brake for a
parked caravan.
-
Ensure that remote radio control is protected from unau-
thorised access (particularly by children!).
-
Never tow the caravan with the drive rollers applied. This
can cause damage to the tyres, the towing vehicle and the
drive units.
-
All wheels and tyres on the caravan must be of the same
size and design.
-
To ensure that the Mover® functions correctly, the clear-
ance between the tyres and the disengaged driving rollers
is 10 - 26 mm (for loaded vehicles and loaded wheels).
All tyres must have the same inflation pressure as per the
manufacturer's instructions (check at regular intervals!).
Driving direction
-
Do not use the Mover® as a support when jacking up the
caravan, since this can damage the drive unit.
-
Sensitive objects such as cameras, DVD-Players etc. must
not be kept in the stowage box near the control unit or the
motor cable. They can be damaged by the electromagnetic
fields.
-
The empty weight of the vehicle increases by the weight of
the Mover®s, which reduces the payload of the vehicle.
-
Remove plug from safety socket after manoeuvring, other-
wise the battery will be discharged. Standby current with
plug inserted approx. 200 mA. Standby current with plug
removed < 1 mA.
10 - 26 mm
min. 110 mm
13