Measures For Preparing Welding - Rothenberger ROWELD P250B Premium CNC SA Bedienungsanleitung

The entry forms can be used to select saved projects or enter new project names. Close and
save using the ENTER key.
Select a pipe.

Use the arrow keys to select the desired pipe and press OK to confirm.

In this final overview of the pipe parameters, the pipe data are shown according to DVS guide-
lines. Press OK to show the window for the welding parts and laying system.
Non-standard modifications can be made by pressing the relevant display field and pressing
ENTER to save. In the Standard point, the description then changes. This can be entered into
the comments field later before printing out the log on the computer. After the pipe data have
been confirmed and saved by pressing OK, the main menu appears.
For P500-630B: For lifting the milling equipment and the heating element, use lifting device
53410 (P500B) or 53323 (P630B), or a suitable tool.
3.2.2

Measures for preparing welding

 Pipes smaller than the maximum welding range (diameter) of the machine, mount the
adapter clamping inserts suited for the pipe diameter with the Allen screws found in the ac-
cessories kit.
ROWELD P250-355B: consisting of six wide-surface shells and two small-surface shells.
ENGLISH 33