AEG Protect C 1000 Bedienungsanleitung Seite 90

Messages and alarms
Press "▼" to access part 2 of the UPS status display. It contains current messages
and alarms, if any. Each message or each alarm is displayed in its own window and
you can press "▼" to scroll through them.
If there is no information available, the following message will appear: No active
alarms".
Events are listed and stored in the "Event log" only (a separate menu item) with the
corresponding date and time.
Part 3 of the UPS display contains information on the battery status it can also be
accessed by pressing ▼".
Battery status display
Battery charge
Battery oat charge
Battery discharge
Battery disconnected
Description
Batteries are currently charging
with constant current.
Batteries are currently being
supplied with constant voltage.
Batteries are currently discharging,
e.g. due to an upcoming power
outage.
Battery system not available
because e.g. currently not
connected.