Set-Up And Operation; Unpacking And Inspection - AEG Protect C 1000 Bedienungsanleitung

7

. SET-UP AND OPERATION

.1 UNPACKING AND INSPECTION

The device has been fully tested and inspected. Although the device has been packed
and shipped with the usual degree of care, damage during transport cannot be ruled
out completely.
Claims for damage during transport must always be made with the transport company!
Check the shipping container for damage on arrival. If necessary, ask the transport
company to check the goods and make a record of the damage in the presence of the
member of sta from the transport company. Don t turn on the unit and register the
damage with the AEG representative or dealer immediately.
Check the contents of the shipment for completeness:
PROTECT C with 1000, 2000 or 3000 VA
Mains connection cable with safety plug
2 device connecting cables (10 A) (when C 3000 1x10 A and 1x16 A)
USB communication line
Operating Instructions
External battery modules includes:
External battery pack
Special battery connection cable
Please contact our hotline in case of any discrepancy.
The original packaging provides e ective protection against mechanical shocks and
should be retained so the unit can be transported safely later on.