Equipment; Technical Specifications - Parkside PTPU 1500 A1 Originalbetriebsanleitung

z Equipment
NOTE: After unpacking the product, please check that all of the package contents are present and
that the pond pump is in perfect condition. Do not use the device if it is defective.
To do this see Fig. A, B, C:
Pump
1
Mains plug
2
Suction pads
3
Front cover
4
Filter grille
5
Nozzle connector, 13 mm
6
Nozzle connector, 16 mm
7
Cover for pump wheel unit
8
Pump wheel unit
9
NOTE: The use of the term 'product', 'device' or 'pump' in the following text refers to the pond
pump named in these operating instructions.
z Technical Specifications
Model:
Power supply voltage:
Output:
Maximum water flow per hour:
Appliance class:
Protection class:
Maximum pumping height:
Long mains cable:
Water temperature:
NOTE: The maximum pumping height and maximum water flow per hour are specific values for the
pump. In reality these values may be reduced by the nozzle connector used and by using nozzles, hoses
and similar components which are connected to the pump. These type of connections increase the flow
resistance of the water against which the pump has to work.
Changes to technical and visual aspects of the product may be made as part of future developments
without notice. Accordingly, no warranty is offered for the physical dimensions, information and
specifications in these operating instructions. The operating instructions cannot therefore be used as
the basis for asserting a legal claim.
PTPU 1500 A1
220–240 V ~ 50 Hz
30 W
1500 l
I
IP68
1.6 m
1.5 m
4 °C - 35 °C
GB/IE/NI/CY/MT 7