Function; Dip S/W Setting - LG MU2R15 Montageanleitung

FUNCTION

DIP S/W Setting

If you set the DIP Switch when power is on, the change in setting is not applica-
ble. The changing setting is enabled only when Power is reset.
DIP Switch
1 2 3 4 5
Normal Operation (No Function)
Forced Cooling Operation
Wiring Error Check
Saving Power Consumption (Step 1)
Saving Power Consumption (Step 2)
Mode Lock (Cooling)
Mode Lock (Heating)
Night Quiet Mode (Step 1)
Night Quiet Mode (Step 2)
Mode Lock (Cooling) + Night Quiet Mode (Step 1)
Mode Lock (Cooling) + Night Quiet Mode (Step 2)
Mode Lock (Cooling) + Saving Power Consumption (Step 1)
Mode Lock (Cooling) + Saving Power Consumption (Step 2)
Mode Lock (Heating) + Saving Power Consumption (Step 1)
Mode Lock (Heating) + Saving Power Consumption (Step 2)
WARNING
!
When you set the DIP switch, you should turn off the circuit breaker or shut the power
source of the product down.
CAUTION
!
· Unless the applicable DIP switch is set properly, the product may not work.
· If you want to set a specific function, request that the installer sets the DIP switch appropriate-
ly during installation.
Function
FUNCTION
25