Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
To operate the buttons correctly
•
The buttons respond to touch, you do not need to apply pressure.
•
Use the ball of your finger to tap them (see picture).
•
Each time a touch is detected, you will hear a beep.
•
Make sure that the buttons are always clean and dry and that they are not
covered by any object (e.g. a pot holder). Even a thin film of water can mean
that the buttons cannot be operated properly.
Start cooking
After switching on, the buzzer sounds once, all indicators light up for 1 second and
then go out. The ceramic hob is in standby mode.
1.
Touch the On/Off button.
All indicator lights show "-".
2.
Place a suitable pan on the cooking zone you want
to use. Make sure that the bottom of the pot and the
surface of the cooking zone are clean and dry.
3.
Use the [+] or [-] buttons to set the desired power of the selected cooking
zone.
Note: If you do not make any setting within one minute, the appliance switches
off automatically. Start again from step 1. You can change the power at any time
during the cooking process.
EN
43
Werbung
Inhaltsverzeichnis
Fehlerbehebung
