Operation - Klarstein TrinityCook Bedienungsanleitung

EN
28

OPERATION

Note: Before using the induction hob, put a cookware made of ferromagnetic metal
on to the hob surface.
Switch on induction hob
Touch the On/Off button
display (5) shows the following:
Set power level
Touch the power level button
for the selected cooking zone above the cooking zone display (5) flash.
"0" is shown on the display of the selected cooking zone.
Use the slider to set the desired power level from "1" to "9".
To switch off the selected cooking zone, move the slider to the left with your finger until
the cooking zone display (5) shows "-".
Set temperature
Touch the temperature button
of the selected cooking zone above the cooking zone display (5) flash.
Set a temperature between 60 °C and 240 °C with the touch slider.
To switch off the selected cooking zone, move the slider to the far left with your finger.
Set timer
Touch the Timer button
(+/-) buttons to set a time between 0-180 minutes. The timer display (8) comes on.
When the timer countdown is over, a beep signal sounds and the induction hob is
switched off automatically.
, a beeping sound will be heard. The cooking zone
. The power level control lamp and the control lamp
. The temperature control lamp and the control lamp
,the timer control lamp lights up. Use the plus and minus