Product Description; Use And Operation - Klarstein 10012195 Bedienungsanleitung

1 Cooktop
2 Control button
3 Control panel with display
4 Air intake opening
5 Air vents
6 On/Off button
7 Display
8 Power level display
9 Menu button
10 Display temperature button
11 Display automatic switch off timer
• After plugging the induction hob in the electric outlet you will hear a beep and you will see „OFF" on the
display. Press the on/off button and the display will show „ON", the fan will start and the induction hob will
change from standby mode to heating mode.
• The induction hob detects if you are using correct cookware. If yes, after the „ON" indicator shows on the
display, press the „Menu" button and you can select the cooking setting, the hob will switch on.
• Otherwise, it is not possible to select the cooking setting after pressing the „Menu button' You will hear
repeated sound signal and the display shows warning notice E0. The induction hob will switch to standby
mode after 40 seconds.
Setting the power level
1. Press the „Menu" button and the light indicator of poweru?" turns on.
2. After switching on, the power level is automatically set to 1600 W.
3. Using the power control button you will set the required power level in the range of 200 - to 1800 W (10
stage power setting).
Setting the temperature
1. Press the wMenuff button twice and the light indicator of temperature uoC turns on.
2. After switching on, the temperature is automatically set to 240 °C.
3. Using the control button, set the temperature to required level in the range of 60-240 °C (10 stage temperature
control).
9
All manuals and user guides at all-guides.com

Product Description

Use and Operation