Maintenance And Repair - Scheppach ox t500 Original Anleitungen

Maintenance and Repair

motor is switched off. Pull the power plug.
An experienced worker can carry out minor repairs on the
machine alone.
only be carried out by a qualified electrician.
All protective and safety devices must be reattached im-
mediately after completed repair and maintenance work.
Problem
1. Motor stops starting
2. Fails to split logs
3. Log pusher moves jerkily, taking
unfamiliar noise or vobrating a lot
4. Oil leaks around the cylinder ram or
ffrom other points
Legend for the symbols
attached to the machine
Wear working shoes and gloves!
damages before you start working!
Wear safety glasses!
Please provide for the proper
disposal of waste oil!
10 english
ox t500 Innen.indd 10
We recommend:
sharpened or replaced after wear.
main smooth running. Lubricate with a few dropsof oil
when necessary.
bark, etc.
Trouble shooting
Overload protection device disengaged
to protect the log splitter from being
damaged
the machine
Lack of hydraulic oil and excessive air
in the hydraulic system
operating
moving the log splitter
Disconnect the mains plug prior to the
repair, cleaning, and maintenance of
the splitter!
Do not reach into the machine without
any protection!
perfect log loading
dealer
rotations before operating the log
splitter
moving the log splitter
-
15.09.11 12:45