Before Using The Appliance For The First Time; Before You Use The Appliance For The First Time; Energy-Saving Advice - Atag KA8074K1C Bedienungsanleitung

Before using the appliance for the first time

Before you use the appliance for the first time

Do not connect the appliance to the mains until you have carefully read the instructions for the correct
and safe use of the appliance. We recommend that you keep these instructions for future use. If you
sell the appliance, enclose them with the appliance.
Inspect the appliance for damage and/or irregularities. If the appliance is damaged, contact the
store that sold you the appliance.
Allow the appliance to stand upright for at least 4 hours before you connect the appliance to the
mains. This reduces the risk of malfunctions resulting from transport effects on the refrigerant unit.
Before using the appliance for the first time, the interior and all internal accessories should be cleaned
with lukewarm water and a neutral cleaning agent. Wipe the cleaned parts with a cloth with clean
water and then dry them thoroughly.
Clean the wooden parts with a damp cloth. Make sure the wood is not too wet and leave the parts
to fully dry before returning them to the appliance.

Energy-saving advice

• Install the appliance as stated in the instructions for use.
• Continuous use of ECO mode is recommended.
• Do not open the door more than necessary.
• Do not cover or block the ventilation slots.
• Replace a damaged door gasket or a gasket that no longer provides a perfect seal as soon as
possible.
• When placing bottles on the shelves, make sure the air can freely circulate around them (observe
the recommendations from the instruction manual and do not place more bottles on the shelves
than recommended or indicated).
• In case of a power supply failure, leave the door closed as long as possible to maintain the
temperature inside the appliance.
15