Settings Menu - Atag KA8074K1C Bedienungsanleitung

Operation
Stopping the alarm:
Short press on alarm key will stop 'PF' blinking.
After that, current measured temperature and current humidity value will be shown on displays 'T'
and 'H'.
If you press on alarm key again, alarm will be canceled. Compartment setpoint temperature and
humidity level will be shown on displays 'T' and 'H'.
INFORMATION!
When Power outage high temperature alarm is canceled, Temperature alarm can be still active.
In that case, alarm behaves like Temperature alarm.

SETTINGS MENU

Because the appliance has extensive setting options, a menu system was defined to provide access
to all settings. As a default all settings are already set, so it is not necessary to go through SETTINGS
MENU. But to adapt the appliance settings to your preferences it is possible to do so.
Enter SETTINGS MENU
You can enter SETTINGS MENU with a short press on the settings key
First option in SETTINGS MENU will be shown.
Basic logic
GROUP NAME
The temperature display 'T' will be used to represent the GROUP NAME of menu options and the
MENU option itself. There are 8 Groups of menu options: GENERAL, SOUNDS, DISPLAY, LIGHT,
PROXIMITY AND DOOR SENSOR, NIGHT MODE, NETWORK CONNECTION, SYSTEM.
The humidity display 'H' will be used to represent the settings and values that can be selected. It
differs per menu option how many or what kind of settings there are possible.
32
MENU option According settings and values will be displayed
Options and values will be explained.
.