Atag KA8074K1C Bedienungsanleitung Seite 232

Operation
Humidity box notification
The appliance can notify you when humidity box needs to be refilled. Humidity box notification starts
when 7 days average value of compartment humidity is between 40% - 50% for 7 days constantly.
So you do not have to remember to check it yourself and can also help avoid triggering the humidity
alarm.
The alarm key
heard.
Humidity box notification can be (de)activated in SETTINGS MENU. So if you do not have a humidity
box or you prefer to check the humidity box yourself, it can be set to 'OF', then humidity box notification
alarm is not active.
INFORMATION!
Every time the appliance is switched on, it takes a while until the correct humidity is reached. For
this reason, the notification is disabled for the first 24 hours after the appliance is switched on to
prevent the unnecessary activation of the notification. Each time the door is closed, humidity
notification is blocked for 6 hours.
If the difference between old setpoint and new setpoint is less than 5°C, it has no influence on
humidity notification.
Stopping the notification:
Short press on alarm key will cancel humidity box notification, alarm key is not illuminated anymore
but humidity value continues to blink until value goes between 50% and 80%.
If humidity value reestablishes between 50% and 80% and humidity box notification is active, it will
be canceled automatically.
30
and humidity value are blinking softly . No alarm sound is