First Plug-In - Atag KA8074K1C Bedienungsanleitung

Operation
Keylights intensity depends on the availability of the certain function:
Function not available
Function available
Function activated or to be activated

First plug-in

INFORMATION!
When the appliance is plugged in for the first time or after the appliance was disconnected from
the mains for a longer period of time it is mandatory to wait four hours until the appliance can be
activated.
Appliance-Off is the default state of the appliance. After the appliance is plugged in to the power
supply, it is still Off. To indicate that the power cord is attached to the electricity On/Off key is blinking
softly
Appliance-On is normal control state of the appliance.
Appliance is switched on with a 2 seconds press on On/Off key
The appliance will start cooling with default setpoint temperature.
The display will switch to Status display, which is like the 'HOME' page of the appliance.
All functions and control modes are operating according to what is set in SETTINGS MENU. In
SETTINGS MENU you can see how to adjust each one of them and it can also be done through the
mobile application (refer to chapter "SETTINGS MENU").
Status display: door open
Status display: door closed
Pressing on On/Off key for 2 seconds again, switches the appliance off.
26
. Display is still inactive.
Keylight intensity with door closed or
opened
0%
60%
100%
.