Atag KA8074K1C Bedienungsanleitung Seite 221

Door sensor (3)
When you open or close the appliance door, light will change according to your preferences. They
can be set in SETTINGS MENU.
• Door open: light change to (no change, ambient mode or functional mode)
• Door closed: light change to (no change, ambient mode or functional mode)
Door sensor error is detected, when door open time reaches 10 minutes. In that case light is turned
off.
LED illumination (4)
LED illumination is installed on the appliance ceiling. Owing to the use of LED illumination, the wine
will not be exposed to UV rays and heat. The intensity, color and time interval of LED illumination
can be changed in SETTINGS MENU.
Two light modes can be set and saved to use in different situations: Ambient mode and Functional
mode.
Ambient mode: its purpose is to blend into the living space ambiance. It will be activated when the
door is closed (default).
Functional mode: its purpose is to provide a clear view on the shelves. It will be activated when
the door is opened (default).
Each light mode consists of a combination of intensity and warmth. These settings can be changed
to your preferences. Light color can be changed in range of 2700K-5000K, light intensity can be set
from 0% to 99%
The activating and deactivating of the modes in different situations can be set in SETTINGS MENU.
Priorities for lights control settings
Priority
1.
2.
3.
Charcoal filter (5)
Fresh air is drawn into the appliance interior through active charcoal air filter. This ensures freshness,
as well as absence of dust and odours. The fan then distributes the air evenly across the appliance
interior.
Replace the air filter approximately every 12 months. A notification will appear on the display to
remind you it is time to replace the filter.
Description of the appliance
Switch light function
triggered from ConnectLife mobile application.
Door sensor
Proximity sensor
it overrides all other light settings, can only be
19