Charcoal Filter Countdown And Notification; Sabbath Mode - Atag KA8074K1C Bedienungsanleitung

6. Unpair all
By triggering this option appliance removes all paired user accounts. Data and saved settings remain
the same inside the appliance.
Unpairing function ends automatically if the unpairing process on the cloud is successful or if after
1 minute the unpairing has not been successful on the cloud.
7. Deactivate Wi-Fi modul:
When you wish to stop operating and monitoring the appliance on remote control, you can turn the
Wi-Fi module off the same way you activate it:
•
directly, with a 2 seconds press on Wi-Fi key
• or go to WLAN STATUS inside NETWORK CONNECTION inside SETTINGS MENU.
When the Wi-Fi modul is off, you will not be able to use the mobile app. However, this does not mean
you will need to repeat the pairing process next time you turn the Wi-Fi modul on again. Instead, the
whole process will be automatic. If it occurs that connection between appliance and mobile cannot
be established, please give it some time or unpair and pair again your smart device. If problem
presists, contact customer support.
In case of power failure, state of Wi-Fi modul is saved. When power is restored, it will be the same
as before disconnection.

Charcoal filter countdown and notification

When the appliance is 'On' for the first time, charcoal filter countdown timer is set to 365.
Every 24 hours, when appliance is connected to power supply, 1 day is deducted.
In case of power failure, Charcoal filter lifetime value is saved. When power is restored, it will be the
same as before disconnection.
If you change time or date parameter, it will not affect charcoal filter countdown.
With a 2 seconds press on Charcoal filter key
inside SETTINGS MENU. Display 'H' shows Charcoal filter lifetime value.
When Charcoal filter notification setting is reached, Charcoal filter key
When Charcoal filter countdown timer is =0, then "0" is blinking on display H.
When Charcoal filter countdown timer expires, then Charcoal filter key
After replacing filter, you have to reset Charcoal filter lifetime.

Sabbath mode

Sabbath mode will be activated for 72h directly after activation. All illuminated features and the
display will be temporarily disabled. The cooling system is operating normal. Sabbath mode will be
activated every week again on the same time of the same day.
Sabbath mode active phase ends:
.
, you are redirected to Charcoal filter lifetime
Operation
is illuminated.
is blinking.
47