Electrical Connection - Atag KA8074K1C Bedienungsanleitung

Safety instructions
• Obey the installation instruction supplied with the appliance.
• Always be careful when you move the appliance because it is
heavy. Always wear safety gloves.
• When tilting the appliance, make sure the door does not touch
the floor. The door glass pane is sensitive, especially to any lateral
impact (i.e. impact from the side, on the edge of the door).
• Make sure the air can circulate around the appliance.
• After you place the appliance, wait at least 4 hours before
connecting the appliance to the power supply. This is to allow the
oil to flow back in the compressor.
• Do not install the appliance close to radiators or cookers, oven
or hobs.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or too
cold, such as the construction appendices, garages or cellars.
• When you move the appliance, lift it by the front edge to avoid
scratching the floor.
• Never move or lift the appliance by applying force on the door
handle.
ELECTRIC SHOCK!
WARNING! When positioning the appliance, ensure the supply
cord is not trapped or damaged.

Electrical connection

ELECTRIC SHOCK!
WARNING! Risk of fire and electrical shock.
• The appliance must be earthed.
• All electrical connections should be made by a qualified
electrician.
6