X-Ray Exposure - VATECH Green16 Handbuch

4.3

X-ray Exposure

1. Get out of the X-ray room and close the door.
2. Press and hold down the Exposure Switch until image acquisition is completed.
3. Release the Exposure Switch when the "Image capturing is completed" message
appears on the screen.
Green16 (PHT-65LHS) User Manual
If an emergency occurs during image acquisition, release the

Exposure Switch to cease X-ray emission.
The operator shall observe the X-ray safety regulations applicable

to his/her area at all times during the operation of this equipment.
The operator must keep vocal/visual contact with the patient at all

times during the image acquisition process.
Do not operate the PC during exposure. Doing so may cause the

system to malfunction.
Ask the patient to close their eyes during the operation.

To acquire optimized images, instruct the patient to hold his/her

breath and not to swallow. Also, don't let the patient move until the
Temple Supports are open.
The image appears on the screen.
During X-ray exposure, the status appears as follows.
The LED light of the Exposure Switch turns yellow.

The LED light on the top of the equipment turns yellow.

An alert sound comes out to indicate that X-ray emission is

currently underway.
On Console Software, the radiation mark turns yellow, and "X-RAY"

changes to "X-RAY ON".
4. Acquiring CEPH Images (Optional)
63