Unpacking; Adjustment And Use - Parkside PBK 4 B3 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

c) Protect the safety goggles from extreme tem-
peratures, direct sunlight, shocks, high humid-
ity, wetness, flammable gases, vapours and sol-
vents.
d) Treat the safety goggles carefully. They can be
damaged by bumps, impacts or a fall from a low height.
e) Note that the safety goggles can transmit the
energy of impacts from high velocity particles
(when worn over corrective glasses) and thus
represent a danger to the user.
f) Note that some materials may trigger allergic
reactions upon contact with sensitive skin.
Residual risks
Despite all precautions having been met, some non-obvious re-
sidual risks may still remain. These can be minimised if the "Safe-
ty instructions" and the "Intended use" are observed along with
the whole of the operating instructions.
5. Technical data
Safety goggles
Type ................................................................................... F-3001
Standard ................................................................ EN166:2001
Protection class .......................................................F (low energy
......................................................................... impact at 45 m/s)
Optical class .......................................................1 (continual use
........................................................................without filter effect)
Protective class type ............................................................. clear
Material:
Goggle lens ...........................................................Polycarbonate
Frame ........................................................................... Polyamide
Manufacturer identification .................................................... JYT
Goggle lens .................................................................JYT 1 F CE
Frame ............................................................. JYT 1 F - 166 F CE

6. Unpacking

• Open the packaging and remove the accessory carefully.
• Remove the packaging material, as well as the packaging
and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the accessory for transport damage.
m ATTENTION
The device and the packaging are not children's
toys! Do not let children play with plastic bags,
films or small parts! There is a danger of choking
or suffocating!

7. Adjustment and use

Safety goggles
m WARNING! Check and clean the goggles before
use. Scratched or damaged protective glasses im-
pair visibility and offer only a reduced protective
effect. Safety goggles with scratched or damaged
protective glasses should be replaced immediately.
• Adjust the extensible headband of the safety goggles to fit
your head.
• Ensure that they fit comfortably and securely.
• When wearing the safety goggles, ensure that they fit com-
fortably.
8. Cleaning and storage
Safety goggles
• Use a soft, damp and clean lens cloth to clean the safety
goggles. Never use petrol, solvents or cleansers which can
damage plastic.
• To disinfect the safety goggles, use only cleaning agents that
do not contain solvents or aggressive substances.
• Do not exert strong pressure on the surfaces, as this can
cause scratches.
• After use, store and transport the safety goggles in a clean,
dry and UV-proof environment, e.g. in a suitable spectacle
case (not supplied).
Service information
With this product, it is necessary to note that the following parts
are subject to natural or usage-related wear, or that the following
parts are required as consumables.
Wear parts*: Glasses savety goggles
* may not be included in the scope of supply!
9. Disposal and recycling
The accessory is supplied in packaging to prevent it from being
damaged in transit. The raw materials in this packaging can be
reused or recycled.
The accessory is made of various types of material, such as
metal and plastic. Take defective components to special waste
disposal sites. Check with your specialist dealer or municipal
administration!
The packaging is wholly composed of environmen-
tally-friendly materials that can be disposed of at
a local recycling centre.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
accessory.
GB/IE/NI 3