Inflation System; Pressure - Zodiac NZO 760 Eignerhandbuch

INFLATING THE ENGINE
Attach the hose connector to the inflation pump inflation port.
To inflate your boat properly, the inflation pump should be correctly placed on the ground.
The boat inflates rapidly if the inflation pump is used smoothly and without haste.
WARNING
INFLATING THE BUOYANCY CHAMBER
• Place the adapter corresponding to the diameter of the semi built-in valve at the inflation
pump hose nozzle.
Inflate the buoyancy chamber, balancing the pressure between the different
compartments until the partitions (a) are no longer visible (pressure = 240 mb)
Never put a compartment
under pressure while the
others are still fully
Inflating is complete: Screw on the inflating valve caps.
NOTE:
BUOYANCY CHAMBER – Inflation system
Activate all valves in the inflation position.
DO NOT USE A COMPRESSOR OR COMPRESSED AIR CYLINDER.
BUOYANCY CHAMBER - Pressure
deflated.
1
2
A slight loss of air is normal before the cap is screwed on.
Only the caps guarantee final air tightness.
a