Safety Instructions - Ferm JSM1018 Gebrauchsanweisung

DK
116
1

Safety instructions

Check the machine and accessories for transport damage.
Product information
Fig. 1 + 2b
1. Speed control
2. Interlocking knob
3. Switch
4. Connection point vacuum cleaner
5. Allen key
6. Bottom plate
7. Saw buckle
8. Pendulum
9. Guard
10. Saw blade
11. Laser switch
2. SAFETY INSTRUCTIONS
In this manual and/or on the machine the following symbols are used:
Read the users manual.
In accordance with essential applicable safety standards of European
directives.
Class II machine - Double insulation - You don't need any earthed plug.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
Denotes risk of electric shock! Always check that the power supply
corresponds to the voltage on the rating plate.
Immediately unplug the plug from the mains electricity in the case that the cord
gets damaged and during maintenance
Caution! Laser beam! Never look into the light beam and never aim the laser at
a person when it is switched on.
The number of revolution of the machine can be electronically set.
Ferm Ferm
GB
05