Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Set-ppoint setting function
From
READY
or
To activate the function:
- Press "-" button or "+" button for a time
period t>=Ton
- Display views the flashing set-point
- with "-" and "+" buttons it is possible
to set the desired value (minimum
and maximum value according to data
measured via serial by the power)
- After t>=ToutAutoSave
- If the value has been changed it is sent
to the power)
-
You
exit
from
coming
back
the measured temperature
Lght function
If
light
function
To change LIGHT status you have to act
on the LIGHT button as showed in the
scheme.
FUNCT
status
by the remote control status, with fixed
volume level limitation, which can
typically be modified on the source. When
the
function
the RC measures the audio cassette and
to
see
an ongoing Bluetooth connection, it turns
on the volume board leds according
to the vo-lume level in playback.
The name of the bluetooth audio device
is: "Bluto MODO" The default pas-sword
for the affiliation is "0000"
deadline
32 and it can be modified with the slider
that is just at the bottom of the RC.
is
available:
you need to use the 5 areas that create
the "volume bo-ard".
21
L8 led status LIGHT status
Blink
Ongoing colors
cycle
ON
Fix colour
OFF
Spenta o non
disponibile
Audio function
Ex. ongoing
Bluetooth
connection
in READY status
This mode is available independently
The function can end:
- Bluetooth unpairing
- ToutAudioIdro or ToutAudioStandAlone
Audio volume
The volume can be set starting from 1 to
To represent the ongoing volume level
L14_1 Volume level 1,2,3,4,5,6
L14_2 Volume level 7,8,9,10,11,12
L14_3 volume level 13,14,15,16,17,18
L14_4 volume level 19,20,21,22,23,24
Pressure
T8t˃=Ton fixes the
colour now showed
T8t˃=Ton moves to
next colour
EN
T8t˃=Ton attiva il
ciclo colori
Werbung
Inhaltsverzeichnis
