Herunterladen Inhalt Inhalt Diese Seite drucken

Important Reminders - glass 1989 Infinity Bedienungs- & Wartungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

abrasives or solvents since they may damage the shell surface. NEVER USE HARSH
CHEMICALS! Damage to the shell by the use of harsh chemicals is not covered
under the warranty.
IMPORTANT: Some surface cleaners contain eye and skin irritants. Keep all
cleaners out of the reach of children and use care when applying.
EN
SPA PANEL
IMPORTANT:
Prolonged exposure to chemicals damages the surfaces. Accidental stains of aggressive
chemicals should be eliminated immediately with plenty of soap and water or mild
detergents.
CARE OF THE SPA COVER
WARNING: Make sure that the thermal safety cover of the Spa is installed and
used properly. Non-secured or improperly secured covers are a hazard. Open
the cover to its fully open position before use.
The thermal cover is a durable and insulating product. Monthly cleaning and conditioning
are recommended to maintain its beauty.
To clean and condition the cover:
1. Remove the cover from the spa and gently lean it against a wall or fence.
2. With a garden hose, spray the cover to loosen and rinse away dirt or debris.
3. Using a large sponge and/or a soft bristle brush, and using a very mild soap solution
(one teaspoon dishwashing liquid with 7.5 liters of water) or baking soda(sodium
bicarbonate), scrub the vinyl top in a circular motion. Do not let the vinyl dry with a
soap film on it before it can be rinsed clean.
4. Scrub the cover's perimeter and side flaps. Rinse clean with water.
5. Rinse off the underside of the cover with water only (use no soap), and wipe it clean
with a dry rag.

IMPORTANT REMINDERS:

• DO remove snow buildup to avoid breakage of the foam core from the additional
weight of the snow.
• DO lock cover lock straps to secure the cover when the spa is not in use.
• DO NOT drag or lift the spa cover using either the flaps or the cover lock straps.
• DO NOT walk, stand, or sit on the cover.
• DO NOT place any metal or heat transferring object on the cover or place any type
of plastic tarp or drop cloth over the cover as this may result in a melted foam core,
which would not be covered under the warranty.
• DO NOT use any chemicals or cleaners except those recommended or its Authorized
Sales and Service Dealer.
6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis