HBM PMX Bedienungsanleitung Seite 114

114
Example: To save the channel name "Channel_name_1" and the
comment "Channel_comment_1" to the amplifier send
the command:
UCC"Channel_name_1;Channel_comment_1"
All selected subchannels (PCS und SPS) are assigned that name !
Note: Response depends on SRB command.
UCC?
Output comment
Syntax: UCC?(x)
Parameter: none
Response: "__(String)__"(y): stored string, with a " at the beginning and
the end
Note: The HBM setup Assistant for the MGCplus distinguishes bet­
ween a channel name and comment which are both stored in the UCC string.
The channel name and comment are separated by a ";"
All comments of all selected subchannels of all selected channels (PCS and
SPS) are returned ! All comments are separated by a ":" .
EUN
Syntax 1: EUNp1(x)
Parameter: p1: "UnitString"
Syntax 2: EUNp1(x)
Parameter: p1: Unit-Code
Note: Response depends on SRB command.
User Channel Comment Query
Engineering Unit
Input of physical unit
Commmands
Not a "," !!! .
A3257−2.0 en/de/fr