HBM PMX Bedienungsanleitung Seite 485

Jeu de commandes
such data being output with a command of this kind.
b.) Set-up commands (e.g. SRB) generate acknowledgment
data (0 or ?). You can define whether such data is output with
this kind of command by switching the option on or off. Un-
known set up commands will still be acknowledged with a „?"
Response:
Response
none
SRB?
Syntax: SRB?(x)
Parameter: none
Response: q1(y)
q1 Switch Response output on/
RIP?
Syntax: RIP?(x)
Parameter: non
Effect: Reads the 16 possible digital inputs of the PMX device and
returns the binary state of each input as integer value
between 0 and 65535. The lower 8 bits represent the 8 inputs
A3257−2.0 en/de/fr
The setup command has been executed (if SRB 1(x) has been
0
? Error (if SRB 1(x) has been executed before)
error if SRB 0(x) has been executed before
Select Response Behavior Query
Output the Response behavior of the current interface
off
0 off
1 on
Read Digital Input query
Digitaleingänge lesen und ausgeben
Meaning
executed before)
The setup command is executed
or
149