Operation Lock; Menu Operation - Hitachi PC-ARFP1E Installations- Und Betriebshandbuch

MENU OPERATION

13.2 OPERATION STOP
Press " " (run/stop) again. The run indicator will be turned off
and the operation will be stopped.
OK

13.3 OPERATION LOCK

• This function is used to lock the setting from the remote
control switch.
• The following functions are applicable.
a. Operation Mode (MODE)
b. Temperature Setting (TEMP)
c. Fan Speed (SPEED)
d. Swing Louver Direction (LOUV)
1 Setting of the operation lock, press " " and "
simultaneously for 3 seconds. The icon of " " will be turned
ON. Even when " " or " " is pressed, locked setting items
will be skipped.
OK
14 MENU OPERATION
14.1 MENU
Every setting function is displayed in the menu. Refer to the
following sections for each function.
?
N O T E
: Unable to set .
If the function with " " is selected from the menu, "No Function" or
"Setting Disabled" will be displayed on the lower screen.
1 Press " " (menu). The menu will be displayed.
OK
2 Select the function by pressing " " or " " and press "OK".
(" " will be displayed if the function is not available).
23 PMML0404A rev.1.1 - 06/2022
A/C Meeting Room
MODE SPEED TEMP
COOL
MED
MODE TEMP ADJ
" (return)
Meeting Room
A/C
MODE SPEED TEMP
COOL
HIGH
15:10(Fri)
Menu
Filter Sign Reset
Elevating Grille
01
Function 3
/
03
Simple Timer
Schedule Timer
SEL. ENT. RTN.
OK
?
N O T E
After the heating operation is stopped, the air flow operation may be
activated for approximately 2 minutes.
2 Cancellation of the operation lock, press " " and "
(return) simultaneously for 3 seconds. " " will be turned
OFF, and operation lock will be canceled.
OK
?
N O T E
• Every time pressing " " and "
seconds, the operation lock state will be switched alternately to
locked/unlocked.
• Select the functions to lock at the function selection setting. Contact
your distributor or dealer of Hitachi for detailed information.
OK
OK
3 Press " " (return) to return to the normal mode (Operation
Mode Indication).
OK
?
N O T E
If the menu screen remains unchanged for approximately 10 minutes, the
screen will automatically return to the normal mode.
"
Meeting Room
A/C
MODE SPEED TEMP
COOL
HIGH
SPEED ADJ
" (return) simultaneously for 3
Menu 15:10(Fri)
Filter Sign Reset
Elevating Grille
01
Function 3 /
Simple Timer 03
Schedule Timer
SEL. OK ENT. RTN.
A/C Meeting Room
MODE SPEED TEMP
COOL
HIGH
SPEED ADJ