Adjusting Date/Time - Hitachi PC-ARFP1E Installations- Und Betriebshandbuch
Vorschau ausblenden
Andere Handbücher für PC-ARFP1E:
- Bedienungsanleitung (19 Seiten) ,
- Installations- und betriebshandbuch (776 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MENU OPERATION
6 The display is switched "Running", "Stand-by" and "Stop" in
order by pressing " " or " " and change the setting.
If other settings are not required, move to procedure (9).
OK
7 Press " " or " " and select "Check interval".
OK
8 The display is switched "30MIN", "60MIN", "90MIN",
"120MIN" and "180MIN" in order by pressing " " or " " and
change the setting.
If other settings are not required, move to procedure (9).
OK
14.11 ADJUSTING DATE/TIME
This function is used to adjust the date and time.
Periodic time setting is recommended. (Clock accuracy:
difference within +70 seconds by month).
As for this remote control switch, the clock can work up to 72
hours when power failure occurs. Reset the date and time if the
remote control switch remains without power supply for longer
than 72 hours or main power supply is OFF for long time.
1 Select "Adjusting Date/Time" from the menu and press "OK".
OK
OK
2 Press " " or " " and select "yy/mm/dd/hh/mm".
3 Press " " or " " to change the setting. Press or keep
pressing " " or " " to adjust numbers.
33
PMML0404A rev.1.1 - 06/2022
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval
30MIN
SEL.
ADJ
OK
ENT.
RTN.
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval
30MIN
SEL.
ADJ
OK
ENT.
RTN.
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval
30MIN
SEL.
ADJ
OK
ENT.
RTN.
Fri
Adjusting Date/Time
Function 13
SEL.
ENT.
RTN.
9 Press "OK" after the setting is completed. The confirmation
screen will be displayed. Select "Yes" by pressing " " or
" " and press "OK". The motion sensor setting will be
confirmed and the screen will return to the normal mode
(operation mode indication).
OK
OK
OK
4 After the setting is completed, press "OK" and the
confirmation screen will be displayed.
OK
OK
OK
5 Select "Yes" by pressing " " or " " and press "OK". The
setting will be confirmed and the screen will return to the
normal mode.
OK
OK
Motion Sensor Setting
Save changes?
Yes
No
SEL.
OK
ENT.
RTN.
A/C
Meeting Room
MODE SPEED
LOUV.
TEMP
HEAT
MED
Motion Sensor is activated
LOUV.
ADJ
Adjusting Date/Time
01 01
00 :19
2011
SEL.
ENT.
RTN.
Adjusting Date/Time
Set date/time?
SEL.
ENT.
RTN.
Werbung
Inhaltsverzeichnis
