Hitachi PC-ARFP1E Installations- Und Betriebshandbuch Seite 37

MENU OPERATION
3 Select the indoor unit to change the louver direction by
pressing " ", " ", " " or " ". Press "OK".
Louver Setting
01-01
01-02
01-03
01-04
Select unit to set.
SEL.
?
N O T E
The indoor unit displayed on the screen flashes if the individual louver
is set.
4 Press " " or " " and select the louver from 1 to 4. The
selected louver is opened and the other louvers are closed.
Louver Setting:01-03
1
Adjust air direction & louver angle
SEL. ADJ
5 Select the louver angle by pressing " " or " " and press
"OK". The confirmation screen will be displayed.
Louver Setting:01-03
1
Adjust air direction & louver angle
SEL. ADJ
The louver angle will be changed as follows.
INDV INDV INDV
6 Select "Yes" by pressing " " or " " and press "OK". The
setting is confirmed and the screen will return to the normal
mode.
Louver Setting:01-03
Set individual louver?
Yes
SEL.
7 Ensure that "INDV" is turned on at the air flow section on the
normal mode.
Meeting Room
A/C
MODE SPEED LOUV.
COOL
HIGH
SPEED
29 PMML0404A rev.1.1 - 06/2022
OK ENT. RTN.
2 3 4
OK ENT. RTN.
2 3 4
ENT. RTN.
OK
INDV INDV INDV INDV
No
ENT. RTN.
OK
TEMP
INDV
ADJ
14.6.2 Cancellation of louver setting
1 Select "Louver Setting" from the menu and press "OK".
Menu
2 Select "Cancel INDV Louver SET" from the individual louver
set and press "OK".
Louver Setting
?
N O T E
If the number of indoor unit connected with the remote control switch is 1
(one), (4) will be displayed after the procedure (2).
3 Select the indoor unit to cancel by pressing " ", " ", " " or
" ". Press "OK". The confirmation screen will be displayed.
Cancel INDV Louver SET
01-01
01-02
01-03
01-04
?
N O T E
The indoor unit displayed on the screen flashes if the individual louver
INDV is set.
4 Select "Yes" by pressing " " or " " and press "OK". The
individual louver setting will be cancelled and the screen will
return to the normal mode.
Cancel INDV Louver SET:01-03
?
N O T E
All the individual louver setting will be cancelled.
15:10(Fri)
Louver Setting
Louver Open/Close
02
VENTI
/
Total Heat Exchanger SET 03
Motion Sensor Setting
SEL. OK ENT. RTN.
Louver Setting
Cancel INDV Louver SET
SEL. ENT. RTN.
OK
Select unit to cancel.
SEL. ENT. RTN.
OK
Cancel individual louver?
Yes No
SEL. ENT. RTN.
OK