Operation Method; Basic Operation - Hitachi PC-ARFP1E Installations- Und Betriebshandbuch

OPERATION METHOD

11 OPERATION METHOD

11.1 BASIC OPERATION

1 Item Selection.
By pressing " "or " ", the icon "
item in order of the indications "MODE", "SPEED", "LOUV."
and "TEMP".
OK
11.2 OPERATION MODE (COOLING, HEATING, DRY, COOLING/HEATING AUTOMATIC AND
AIR FLOW OPERATION)

Function
• Cooling Operation (COOL):
To decrease the room temperature.
• Heating Operation (HEAT):
To increase the room temperature.
• Dry Operation (DRY):
To decrease the humidity in the room.
• Cooling/Heating Automatic Operation (AUTO):
To cooling and heating automatic changeover.
• Air Flow Operation (FAN):
To circulate the air in the room.
?
N O T E
The available set temperature is as follows:
• Cooling Operation: 19 to 30ºC
• Heating Operation: 17 to 30ºC
• Dry Operation: 19 to 30ºC

Before Operation
!
C A U T I O N
• Supply the electrical power to the system for approximately 12
hours before start-up after long shutdown. Do not start the system
immediately after the power supply, it may cause a compressor
failure, because the compressor is not heated well. Do NOT turn OFF
the power supply during the seasons.
• Make sure that the outdoor unit is not covered with snow or ice. If
covered, remove it by using hot water (less than 50ºC).
• If the water temperature is higher than 50ºC, it will cause damage to
plastic parts.
20 PMML0404A rev.1.1 - 06/2022
" will move to the next
Meeting Room
A/C
MODE SPEED LOUV. TEMP
COOL
MED
MODE LOUV. ADJ
2 Change of Settings
With the item ("MODE", "SPEED", "LOUV" or "TEMP")
selected, press " " or " ". The setting will be changed.
OK
1 Turn ON the power supply.
2 Press " " or " " and select "MODE".
OK
3 By pressing " " or " ", the operation mode will be changed
as follows.
OK
?
N O T E
The advanced setting is required for the "AUTO" operation. Contact your
distributor or dealer of Hitachi for detailed information.
Meeting Room
A/C
MODE SPEED LOUV. TEMP
HEAT
HIGH
SPEED ADJ
Connecting
Meeting Room
A/C
MODE SPEED TEMP
COOL
HIGH
SPEED ADJ
FAN
AUTO
DRY
HEAT
COOL
Meeting Room
A/C
MODE SPEED TEMP
HEAT
HIGH
SPEED ADJ