Child Safety Control - Sentiotec Home.com4 Montage- Und Gebrauchsanweisungen

Instructions for use for the user
● User programs [Finnish, combi, 1–5]
► Select the operating mode to be started. You can choose be-
tween Finnish sauna (heating only), combination sauna (heating
+ vaporizer) or one of the five programmable user programs.
● Activated [On/Off]
► Activate or deactivate individual On/Off operations.
2. Exit the weekly timer menu to activate the programs:
► The notification area of the display shows the weekly timer icon.
► Rotary selector 1 starts to flash slowly.
If the mode "Standby for remote control" is started, all weekly timer
programs are deactivated while this mode is active. If you exit the mode
"Standby for remote control", all previously activated programs become
active again.
Main switch 2 must remain switched on for the weekly timer to work.

10.12. Child safety control

The sauna control unit is equipped with a child safety control which
prevents children from being able to switch on the sauna heater unin-
tentionally and unattended.
● To activate the child safety control, use rotary selector 1 to select
the child safety control icon. Then press briefly to activate the child
safety control.
► The icon for child safety control appears on the display and the
operation of the sauna control unit is blocked.
● To deactivate the child safety control, press rotary selector 1 and at
the same time turn it to the right.
p. 44/60