Instructions for use for the user
10.15. Additional output
Infrared heaters or infrared heat plates, for example, can be connected
to the additional output on the sauna control unit.
Intensity regulation when the dimmer switch function is activated
When the dimmer switch function for the additional output is activated,
the power for the additional device can be set on a scale of 1 to 7.
The value of 7 corresponds to full power.
1. Use rotary selector 1 to select the additional output icon. Then press
it briefly to confirm.
► The "Additional output" submenu opens and the display shows
the set intensity value for the additional output underlined.
2. Press rotary selector to change the value.
► The value is now highlighted in green and can be changed.
► Press the rotary selector again to confirm the setting.
3. Move the cursor (underscore) to the right to "On" and briefly press
the rotary selector.
► The additional output switches on.
► The additional output icon appears in the notification area of
the display.
Switching off additional output
4. To switch off the additional output, repeat items 1 and 3.
► Instead of "On", "Off" is displayed.
► To exit the submenu, move the cursor to the "Back" icon on
the left and confirm with the rotary selector.
p. 47/60
EN