Fan; Preset Time - Sentiotec home.com4 Montage- Und Gebrauchsanweisungen

Instructions for use for the user

10.7. Fan

Switching on fan
3. Use rotary selector 1 to select the fan icon. Then press briefly to
switch on the fan.
► The fan switches on.
► "Fan On" appears on the display.
Switching off fan
4. To switch off the fan, press rotary selector 1 again.
► The fan switches off.
► "Fan Off" appears on the display.

10.8. Preset time

Setting the preset time
You can set the preset time to the minute. The maximum preset time
totals 6 hours.
1. Start the functions to be started after the preset time.
2. Use rotary selector 1 to select the preset time icon. Then press briefly
to open the submenu.
► The "Preset time" submenu opens and the last preset time appears
underlined on the display.
3. Press rotary selector to change the value.
► The value is now highlighted in green and can be changed.
► The display is in hh:mm.
► Press the rotary selector again to confirm the setting.
4. Move the cursor (underscore) to the right to "Start" and briefly press
the rotary selector.
► All previously activated functions are switched off.
► The remaining pre-selection time appears on the display.
► Rotary selector 1 starts to flash slowly.
► Once the preset time has elapsed, the selected functions are
started.
p. 40/60