Electrical Connection - Sentiotec Home.com4 Montage- Und Gebrauchsanweisungen

Installation instructions, only for experts
5.

Electrical connection

ATTENTION!
Damage to the unit
● The sauna control unit may only be used for operating and controlling 3
heating circuits with a maximum heating capacity of 3.5 kW per heating
circuit. The maximum evaporator output totals 3.5 kW. The maximum addi-
tional output totals 3.5 kW.
1
7
Cable gland for FTS2 sensor, RS485 BUS line
1
Cable gland for F1 sensor, F2 sensor and safety cut-off
2
Cable gland for vaporizer cable
3
Bushing for heater cable
4
Bushing for power supply cable
5
Cable gland for light and fan
6
Cable gland for loudspeaker cables and DMX cable
7
Cable gland for remote start and foil sensor
8
Cable gland for additional output
9
Cable gland for power booster
a
Ground busbar
b
2 3
8 9
4 5
b
a
p. 19/60
6
EN