Post-Drying Program; Cabin Light - Sentiotec Home.com4 Montage- Und Gebrauchsanweisungen

Instructions for use for the user
EN 60335-2-53:2011; characteristic temperature / relative humidity for proper use.

10.5. Post-drying program

After operation in combined mode, the post-drying program starts au-
tomatically to prevent mould or rot from forming in the sauna cabin.
This involves heating the sauna room to 80 °C with the fan running for
30 minutes.
► To cancel the post-drying program, press rotary selector 1 while
simultaneously turning it to the right.
To prevent mould and rot from forming, the post-drying programme should
NOT be stopped.

10.6. Cabin light

Switching on cabin light
1. Use rotary selector 1 to select the light icon. Then press briefly to
switch on the cabin light.
► The cabin light switches on.
► "Light On" appears on the display.
Switching off cabin light
2. To switch off the cabin light, press rotary selector 1 again.
► The cabin light switches off.
► "Light Off" appears on the display.
Temperature °C
p. 39/60
EN