Setting Date And Time - eQ-3 MAX! Bedienungsanleitung

Further details can be found in chapter 8.
A battery symbol (
to be replaced. After removing the batteries, wait approx.
1 minute before inserting the new ones. This device does
not support battery operation.
The service life of new alkaline batteries is approx-
imately two years.
Using rechargeable batteries is not possible.
Never recharge standard batteries. Doing so will
present a risk of explosion. Do not throw the batter-
ies into a fire. Do not short-circuit batteries.
After inserting or replacing batteries, the firmware version
number will be showing briefly. Following this, date and
time will be requested automatically.
• Set the year, month, day, hour and minute with the hand-
wheel and confirm with the boost button. The motor
moves the control pin backwards during the setting of
date and time.
• If „InS" and the rotating activity symbol „
played, the motor still reverses. If only „InS" is shown in
the display, the MAX! radiator thermostat + can be moun-
ted on the valve.
The MAX! Radiator Thermostat + can be configured alrea-
dy before installation. Therefore, press auto/manu while
54
) indicates that the batteries need

6. Setting date and time

" are dis-