Dometic FJX-Serie Bedienungsanleitung Seite 16

EN
Note The remote control returns to its initial mode if no button is pressed on the remote control for 15 s
while programming the timer.
Set the switch-on timer as follows:
a) Select the desired air conditioning mode and all required values (for example the temperature).
b) If necessary, switch the roof air conditioner to standby.
The switch-on timer can only be set when the roof air conditioner is in standby.
c) Press the
button one time.
The
d) Use the + or – button to set the time when the roof air conditioner shall be switched on.
e) Press the
button.
The switch-on timer is set. The roof air conditioner will be switched on with the selected air
conditioning mode at the specified time.
Set the switch-to-standby timer as follows:
a) If necessary, switch the roof air conditioner on.
The switch-to-standby timer can only be set when the roof air conditioner is switched on.
b) Press the
button twice.
The symbol flashes on the remote control display.
c) Use the + or – button to set the time when the roof air conditioner shall be switched to standby.
d) Press the
button.
The switch-to-standby timer is set. The roof air conditioner will be switched to standby at the specified time.
Set the switch-on timer and the switch-to-standby timer as follows:
a) Select the desired air conditioning mode and all required values (for example the temperature).
b) Press the
button three times.
The
c) Use the + or – button to set the time when the roof air conditioner shall be switched on.
d) Press the
button.
The OFF symbol flashes.
e) Use the + or – button to set the time when the roof air conditioner shall be switched to standby.
f)
Press the button.
The switch-on and switch-to-standby times are set. The roof air conditioner will be switched on for the specified
time period.
To cancel preset timer, press the
The
9.4.8 Setting the sleep function
The sleep function is only available in Cooling (
The sleep function limits the fan speed to a lower level to reduce the noise levels for easier sleeping.
Only FJX7333IHP/FJX7337IHP/FJX7457IHP: The sleep function additionally limits the compressor speed.
16
symbol flashes on the remote control display.
symbol is shown on the remote control display. The ON symbol flashes.
button once.
symbols disappear. Preset values are discarded.
) or Heating ( ) modes.
Dometic FJX