Setting The Current Time; Setting The Timer - Dometic FJX-Serie Bedienungsanleitung

Dometic FJX
9.4.4 Selecting the fan speed manually
In all modes, except for the Automatic(
Display message
Press the button of the remote control or the
The roof air conditioner confirms the receipt of the values with a beep sound.
The new fan speed is set.
9.4.5 Setting the temperature
In the Automatic ( ), Cooling (
between 16 °C and 31 °C.
Use the + or – button on the remote control to set the desired temperature.
The roof air conditioner confirms the receipt of the values with a high note. The temperature is set on the roof air
conditioner.
9.4.6

Setting the current time

The remote control needs the current time in order to program the timer. The time is shown on the remote control
display.
1. Press and hold the
The time flashes on the remote control display.
2. Use the + or – button to set the current time. Press and hold the + or – button longer than 2 s to increase or de-
crease the time quicker.
3. Press the SET button to confirm the time.
9.4.7

Setting the timer

The timer function allows you to set a specific time period for air conditioning. You can specify the switch-on time,
the switch-to-standby time or both values.
The timer function is set via remote control.
) and Dehumidifying (
Description
Low fan level
Medium fan level
High fan level.
Turbo fan level.
Automatic mode (the fan speed is adjusted based on the ambient temperature).
), Heating (
button in order to get into the mode for setting the time.
) modes, the fan speed can be selected manually.
button of the control panel to select the desired fan speed.
) and Dehumidifying ( ) modes, you can specify a temperature
EN
15