Replacing The Remote Control Batteries; Setting The Time - Dometic FW3000 Bedienungsanleitung

Operating the under-bench air conditioner
8.10

Replacing the remote control batteries

Replace the batteries if you see the
The battery compartment is on the back of the remote control.
➤ Gently push down the lid of the battery compartment and slide it open in the
direction of the arrow.
➤ Insert the new batteries (2x type AAA) in the remote control as indicated in the
battery compartment.
➤ Close the cover of the battery compartment.
B
Protect the environment!
Do not dispose of any batteries with general household waste.
Return defective or used batteries to your retailer or dispose of them at
collection points.
8.11

Setting the time

The remote control needs the current time in order to program the timer. The time is
indicated on the display of the remote control.
Perform the following steps to set the time:
I
NOTE
The remote control returns to its initial mode if no key is pressed on the
remote control for ten seconds while setting the time.
➤ Press and hold the CLOCK button to go to the mode used to set the time.
✓ The time flashes on the display of the remote control.
➤ Use the + or – button to set the current time.
➤ Press the SET – °F/°C button to confirm the time.
26
Dometic FreshWell3000
symbol on the display.
EN